High selling right front shock absorber 95B413031 for German Porsche Macan

Standard Suspension Replacement Part for Consolidated Bulk Orders

100% OEM Precise Matching, Direct Bolt-On Installation Without Modification

Full Compatible Vehicle List

1. German-produced Porsche Macan 95B chassis (2014–2024) all trims: Macan 2.0T, Macan S 3.0T, Macan GTS, Macan Turbo

Matching Powertrains

Installation Position

Optimized Heavy-Duty Structural Design

1. High-pressure nitrogen sealed twin-tube structure: Balanced compression and rebound damping performance, reliable anti-fade performance during long-distance mountain road heavy-load driving
2. Seamless cold-drawn cylinder tube + hard chrome plated piston rod: Wear-resistant and rust-proof, effectively preventing hydraulic oil leakage under frequent suspension compression
3. Multi-layer fluorine rubber composite oil seal: Resists hydraulic oil erosion and high-low temperature aging to extend overall service life
4. Integrated PU impact buffer + textile reinforced dust boot: Blocks gravel scratches on the piston rod and eliminates metal collision noise at full suspension compression stroke
5. Galvanized anti-corrosion top pin and bottom clamping bushing: Resists erosion from rain, snow and winter road salt
6. Complete one-piece right front shock strut assembly, supplied with standard installation hardware for direct replacement

Core Vehicle Handling & Riding Comfort Functions

1. Output stable fixed damping force to balance soft smooth city cruising and rigid stable high-speed cornering handling for premium compact luxury SUVs
2. Suppress excessive spring rebound after hitting road bumps, eliminate continuous right front floating shaking
3. Reduce front body tilt during sharp lane changes and turning, improving vehicle road holding and driving safety
4. Filter harsh road vibration transmitted into the cabin and upgrade premium riding comfort of Porsche Macan series
5. Prevent irregular cupped wear on right front tire treads and extend tire service cycle
6. Maintain factory-standard vehicle ride height, avoiding unilateral right front suspension sinking caused by shock absorber failure

Common Solvable Vehicle Faults

• Right front wheel bounces repeatedly multiple times after crossing speed bumps and potholes
• Obvious metal clunk knocking noise from right front wheel arch on uneven roads
• Severe front body tilt and unstable steering during high-speed lane changes
• Visible oil stains and hydraulic leakage on the shock absorber cylinder outer wall
• Cupped scalloped uneven wear on right front tire tread surfaces
• Obvious nose diving of the whole vehicle during heavy emergency braking

Brief Step-by-Step Installation Guide

Required Tools

1. Park the vehicle on flat ground, lift the front axle and secure firmly with jack stands, then remove the right front wheel.
2. Use a spring compressor to pre-compress the front coil spring to release suspension tension.
3. Loosen the top pin fixing nut and bottom strut clamping bolt, then take out the old right front shock strut assembly.
4. Thoroughly clean rust, brake dust and dirt on suspension mounting brackets and axle contact surfaces.
5. Install the new 95B413031 shock absorber, accurately align the top pin and bottom clamping position.
6. Tighten all mounting fasteners to factory specified torque values.
7. Slowly release the spring compressor, reinstall the right front wheel and lower the vehicle fully to the ground.
8. Manually press down the right front vehicle corner repeatedly for slow compression tests to check for abnormal collision noise.
9. Complete a low-speed road test to verify stable damping performance without bouncing or abnormal noise.

Strict Factory Testing & Stable Spot Supply